Dual motor electric slide plate
A double motor electric slide belt drive setup can be composed of the following parts.The dual motor setup is similar to the single motor, with the addition of a second motor and a second electronic speed controller as well as some additional ESC line connectors.
- Electric slide motor
You can use two different electric slide motor.The Dual 6355 will provide a lighter setup and usually more power than you need.Dual 6374 will offer a more powerful setup, but will add extra weight and use a longer truck pylon.Normally, the dual 6355 190kV motor setup will give you more power than you normally need.Dual 6374 is suitable for high performance audiophiles.
Option 1 - Dual 6355 190kV motor and our 180 mm long board truck.
Option 2 - double 6374 190kV motor and our 218mm long board truck.
- Electric slide speed controller
Recommendation - Dual motor setup requires two TORQUE ESC speed controllers.You will need some additional connectors, such as dual ESC XT90 parallel connectors, dual ESC CAN bus connectors.We use male - to - male connectors to connect
- Dual motor mechanical kit
Our Dual Motor Mechanical Kit includes the entire mechanical part of the electric skateboard, which includes the truck, wheels, (2) motor bracket, (2) belt drive system (16T motor pulley /36T drive pulley), long plate bearings, risers, bearing gaskets and deck hardware bolts.
- Remote control for electric skateboard
A reliable remote control without disconnection is a required feature.We recommend our 2.4GHz Mini Remote (trigger throttle) or our 2.4GHz Nano Remote (thumb throttle).
- Battery for electric slide plate
The best electric slide battery for dual motor setup is our 12S4P battery pack.Our 12S4P battery pack has a range of 25-30 miles, providing enough power to power a powerful electric board with plenty of battery capacity for a long commute or ride.
- Long board deck
Suitable for 12S4P electric skateboard battery and dual motor electric skateboard.The best option is a sturdy, sturdy longboard deck with a wheelbase of 36 inches or more.The enclosure will provide protection for the 12S4P battery pack and electronics.
Single motor electric slide plate
A single motor electric slide belt drive setting can be composed of the following parts.
- Electric slide motor
Recommendation - We recommend using a 15mm wide belt 6374 190kV motor for the setup, you do not intend to upgrade in the near future.
Upgrade - If you want to upgrade in the near future you will need to use a 6355 190kV motor with a 12mm wide belt.
- Electric slide speed controller
Recommends - Use the Torque ESC speed controller because of its amazing startup power and the ability to fully control and configure your ESC power output.The typical RC ESC speed controller is usually unreliable to start from stop, which requires you to start while riding.
- Single motor mechanical kit
Our single motor mechanical kit includes the entire mechanical part of the electric skateboard, including the truck, wheels, motor bracket, belt drive system (16T motor pulley / 36T drive pulley), long plate bearings, risers, bearing gaskets and deck hardware bolts.
- Remote control for electric skateboard
A reliable remote control without disconnection is a required feature.We recommend our 2.4GHz Mini Remote or our 2.4GHz Nano Remote.
- Battery for electric slide plate
Electric slide battery usually consists of 18,650 cells or RC lithium polymer batteries.You also need a shell.Our custom prefabricated 12S2P and 12S4P electric slide battery packs include a housing with our battery pack.
First, you have to figure out what style of longboard deck you like.You need to ensure that you have enough wheelbase space for all components.
The easiest deck to use is the hard, sturdy longboard deck.
For our 18650 battery packs (12S2P and 12S4P), we recommend a wheelbase of 26" or longer, which will suit the specific housing of our electric skateboard battery packs.